VIDEO

AGGREGATES

The Whirlwind® Air Classifier incorporates a self-contained fan and rejecter blade classification system. Its internal fan design does not require cyclones, air locks or dedicated baghouse for product collection of particles in the range of 100 to 400 mesh. Completely self-contained, requires no process dust-collection equipment.

Animal Renderings

The Whirlwind® Air Classifier incorporates a self-contained fan and rejecter blade classification system. Its internal fan design does not require cyclones, air locks or dedicated baghouse for product collection of particles in the range of 100 to 400 mesh. Completely self-contained, requires no process dust-collection equipment.

Mobile Air Classifier

The Whirlwind® Mobile Air Classifier effectively removes excess fines from aggregate products bringing materials formerly considered waste materials into specification. The Mobile Air Classifier’s dry separation process eliminates the need for water typically used in washing plants, which is especially important in remote areas where water is not readily available.

Superfine Air Classifier

The SuperFine Air Classifier is used to separate powders in the range of 5 to 44 microns.

Side Draft Air Classifier

The Side Draft High Efficiency Air Classifier is used to separate powders in the range of 100 to 400 mesh (150-38 microns).

Micronizer®

The Micronizer® is a jet mill that employs a unique fluid energy grinding system to generate particle-on-particle impact.

Simpactor

Designed to use varying degrees of impact and agitation to process materials, the Sturtevant Simpactors® are among the most versatile equipment available in the materials processing industry. From high-impact grinding at top speeds of 45,000 feet per minute to controlled slower RPM mixing and blending, pin mills are easy to operate, highly reliable, safe and simple to adapt for applications. The Sturtevant Simpactor® is a centrifugal, pin-type impact mill, reduces low-to-medium-density materials to uniform fine particle size of 50-200 mesh.

FCM

The FCM, an air-swept impact mill with integral classifier, grinds to low-micron range with tightest particle size distribution.

Whirlwind Air Classifier

The Whirlwind® Air Classifier incorporates a self-contained fan and rejecter blade classification system. Its internal fan design does not require cyclones, air locks or dedicated baghouse for product collection of particles in the range of 100 to 400 mesh. Completely self-contained, requires no process dust-collection equipment.